https://www.high-endrolex.com/10

English | Latinica | Ћирилица
12. Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike (DEMI 2015)
ДЕМИ 2017
Бања Лука
26 - 27 мај 2017

prof Miroslav Živković

Библиографски подаци

Поље истраживања:

Машинско инжењерство, (Примењена механика, Примењена информатика и рачунарско инжењерство)

Публикације:

Монографска студија/поглавље у књизи М12 или рад у тематском зборнику међународног значаја

  1. Jovičić G., Živković M., Kojić M., Vulović S., A Numerical Procedure for Calculation of the Stress Intensity Factors and Its Use for Life Assessment of the Steam Turbine Housing of the Thermal Power Plant, From Fracture Mechanics to Structural Integrity Assessment, Beograd, 2003

 

Рад у врхунском међународном часопису

  1. Živković M., Kojić M., Slavković R. and Grujović N., A general beam finite element with deformable cross-section, Computer Methods in Applied Mechanics and Engineering, Vol.190, No.20-21, pp. 2651-2680, ISSN 0045-7825, 2001
  2. Kojić M., Vlastelica I. and Živković M., Implicit stress integration procedure for small and large strain of the Gurson material model, International Journal for Numerical Methods in Engineering, Vol.53, No.12, pp. 2701-2720, ISSN 0029-5981, Doi 10.1002/nme.410, 2002
  3. Mijailović S., Kojić M., Živković M., Fabry B. and Fredberg J., A finite element method of cell deformation during magnetic bead twisting, Journal of Applied Physiology, Vol.94, No.4, pp. 1429-1436, ISSN 8750-7587, Doi 10.1152/japplphysiol.00255.2002, 2002
  4. Grujović N., Divac D., Živković M., Slavković R., Milivojević N., Milivojević V., Rakić D., An Inelastic Stress Integration Algorithm for a Rock Mass Containing Sets of Discontinuities, Acta Geotechnica, Vol.8, No.3, pp. 265-278, ISSN 1861-1125, 2013
  5. Milovanović V., Dunić V., Rakić D., Živković M., Identification causes of cracking on the underframe of wagon for transportation containers - Fatigue strength assessment of wagon welded joints, Engineering Failure Analysis, Vol.31, No.-, pp. 118-131, ISSN 1350-6307, 2013
  6. Slavković R., Živković M. and Kojić M., Enhanced 8-node three-dimensional solid and 4-node shell elements with incompatible generalized displacements, Communications in Numerical Methods in Engineering, Vol.10, No.-, pp. 699- 709, ISSN -, 1994
  7. Kojić M., Živković M. and Kojić A., Elastic-Plastic analysis of orthotropic multilayered beam, Computers & Structures, Vol.-, No.57, pp. 205-211, ISSN -, 1995
  8. Kojić M., Grujović N., Slavković R. and Živković M., A General Orthotropic Von Mises Plasticity Material Model with Mixed Hardening: Model Definition and Implicit Stress Integration Procedure, Journal of Applied Mechanics, Vol.-, No.63, pp. 376-382, ISSN -, 1996
  9. Jovičić G., Nikolić R., Živković M., Milovanović D., Jovičić N., Maksimović S., Đorđević J., An estimation of the high-pressure pipe residual life, Archives of Civil and Mechanical Engineering, Vol.13, No.1, pp. 36-44, ISSN 1644-9665, 2013
  10. Nikolić R., Radovanović M., Živković M., Nikolić A., Rakić D., Blagojević M., Modeling Of Thermoelectric Module Operation In Inhomogeneous Transient Temperature Field Using Finite Element Method, Thermal Science, Vol.18, No.Suppl. 1, pp. S239-S250, ISSN 0354-9836, 2014
  12. Jovičić G., Grabulov V., Maksimović S., Živković M., Jovičić N., Bošković G., Maksimović K., Residual Life Estimation of a Thermal Power Plant Component – The High-Pressure Turbine Housing Case, THERMAL SCIENCE International Scientific Journal, Vol.13, No.4, pp. 99-106, ISSN 0354-9836, Doi 10.2298/TSCI0904099J, 2009
  13. Jovičić G., Živković M., Jovičić N., Numerical Simulation of Crack Modeling using Extended Finite Element Method, Strojniški vestnik – Journal of Mechanical Engineering, Vol.55, No.9, pp. 549-554, ISSN 0039-2480, Doi UDC 620.178, 2009
  14. Jovičić G., Živković M., Sedmak A., Jovičić N., Milovanović D., Improvement of algorithm for numerical crack modeling, Archives of Civil and Mechanical Engineering, Vol.10, No.3, pp. 19-35, ISSN 0354-9836, 2010
  15. Lazić V., Sedmak A., Živković M., Aleksandrović S., Čukić R., Jovičić R., Ivanović I., Theoretical-Experimental Determining of Cooling Time (t8/5) in Hard Facing of Steels for Forging Dies, Thermal science, Vol.14, No.1, pp. 235-246, ISSN 0354-9836, Doi 10.2298/TSCI1001235L, 2010
  16. Mandić V., Adamović D., Jurković Z., Stefanović M., Živković M., Ranđelović S., Marinković T., Numerical FE Modelling of the Ironing Process of Aluminium Alloy and its Experimental Verification, FAMENA, Vol.34, No.4, pp. 59-69, ISSN 1333-1124, 2010
  17. Živković M., Nikolić A., Slavković R., Živić F., Nonlinear Transient Heat Conduction Analysis of Insulation Wall of Tank for Transportation of Liquid Aluminum, Thermal Science, Vol.14, No.Suppl., pp. S299-S312, ISSN 0354-9836, Doi 10.2298/TSCI100506029Z, 2010
  18. Živković M., Vulović S., Vujanac R., Assessment of the Drum Remaining Lifetime in Thermal Power Plant, Thermal Science - International Scientific Journal, Vol.14, No.Suppl., pp. S313-S321, ISSN 0354-9836, Doi DOI:10.2298/TSCI100507030Z, 2010
  19. Stepanović Ž., Živković M., Vulović S., Aćimović Lj., Ristić B., Matić A., Grujović Z., Visoka, otvorena, klinasta osteotomija tibije: analiza pet modaliteta unutrašnje fiksacije metodom konačnih elemenata, Vojnosanitetski pregled, Vol.68, No.10, pp. 867-871, ISSN 0042-8450, Doi 10.2298/VSP1110867S, 2011
  20. Blagojević M., Nikolić A., Živković M., Živković M., Stanković G., Influence of blocks' topologies on endothelial shear stress observed in CFD analysis of artery bifurcation, Acta of Bioengineering and Biomechanics, Vol.15, No.1, pp. 97-104, ISSN 1509-409, 2013
  21. Blagojević M., Nikolić A., Živković M., Živković M., Stanković G., A Novel Framework for Fluid/Structure Interaction in Rapid Subject-Specific Simulations of Blood Flow in Coronary Artery Bifurcations, Military Medical and Pharmaceutical Journal of Serbia, Vol.71, No.3, pp. 285–292, ISSN 0042-8450, 2014
  22. Petrović R., Živković M., Zheng Rong W., Rakić D., Slavković R., Influence of Air Content Entrained in Fluid of a Vane Pump with Double Effect Operating Parameters, Technical Gazette, Vol.21, No.2, pp. 401-407, ISSN 1330-3651, 2014

 

Рад у часопису међународног значаја верификованог посебном одлуком

 

  1. Živković M., Milovanović V., Rakić D., Vulović S., Numerical Analysis Welded Joints of Wagon Constructions, Welding & welded structures, Vol.56, No.3, pp. 101-106, ISSN 0354-7965, 2011

 

Научна критика и полемика у истакнутом међународном часопису

 

  1. Milovanović V., Rakić D., Živković M., Vulović S., Milutinović M., Thermo-mechanic Analysis of Cement Transport Wagon - Identification of the Cause of Cracks, Anals of Faculty Engineering Hunedoara - International Journal of Engineering, Vol.11, No.4, pp. 309-314, ISSN 1584-2673, 2013

 

Предавање по позиву са међународног скупа штампано у целини(неопходно позивно писмо)

 

  1. Živković M., Jovičić G., Numerical Methods in Fracture Mechanics, The 3rd International Conference of Serbian Society of Mechanics, Vlasina lake, Serbia, 2011, 5-8 July
  2. Adamović D., Mandić V., Stefanović M., Jurković Z., Živković M., Pavletić D., Perinić M., Numerical and Experimental Analysis of the Wall Tensile Stress in Ironing, 10th International Scientific-Expert Conference Maintenance and Production Engineering – KODIP 2012, Budva, Montenegro, 2012, 26-29 June, pp. 23-32, ISBN 978-9940-527-24-2
  3. Živković M., Experimental and Numerical Analysis of Spot Welded Joints and Constructions, 11th Youth Symposium on Experimental Solid Mechanics, Brasov, Romania, 2012, 30 May - 2 June, pp. 25-26, ISBN 978-606-19-0079-4

 

Саопштење са међународног скупа штампано у целини

 

  1. Kojić M., Grujović N., Slavković R. and Živković M., Yield Criterion for a General Anisotropic Plasticity Model with Mixed Hardening, EUROMECH, 2nd European Solid Mechanics Conference, H20, Genoa, Italy, 1994
  2. Kojić S., Grujović N. and Živković M., Nonlinear Analysis of Joint Behavior Under Thermal and Hydrostatic Loads for an Arch Dam, Third benchmark workshop on Numerical analysis of dams, Paris, France, 1994
  3. Kojić M., Slavković R., Grujović N. and Živković M., A Solution Procedure for Large Strain Plasticity of the Modified Cam-Clay Material, 4th National Congress on Mechanics, Xanthi, Greece, 1995, pp. 511-518
  4. Kojić M., Slavković R., Grujović N. and Živković M., Implicit Stress Integration Procedure for the Generalized Cap Model in Soil Plasticity, Complas 4, Barcelona, Spain, 1995, pp. 1809-1820
  5. Kojić M., Živković M., Grujović N. and Slavković R., Elastic-plastic Analysis of Multilayered Orthotropic Pipe as a Beam Superelement with Deformable Cross-section, Complas 4, Barcelona, Spain, 1995, pp. 2129-2140
  6. Kojić M., Zloković D. and Živković M., FE Nonlinear Analysis of Initially Symmetric Structures Under Nonsymmetric Loading by Application of the Group Theory, 4th National Congress on Mechanics, Xanthi, Greece, 1995, pp. 416-423
  7. Maksimović S., Kojić M., Grujović N., Slavković R. and Živković M., Geometric and Material Initial Failure of Layered Fiber Reinforced Composite Structures: Numerical and Experimental Study, Complas 4, Barcelona, Spain, 1995, pp. 1235-1244
  8. Živković M., Kojić M., Slavković R. and Grujović N., A Beam Superelement with Deformable Cross-section for Geometrically Nonlinear Analysis, 4th National Congres on Mechanics, Xanthi, Greece, 1995, pp. 453-462
  9. Grujović N., Slavković R., Živković M. and Filipović N., Solution of Large Structural Car Models by Finite Element Method, JUMV 16. International conference science and motor vehicles, Beograd, 1997, pp. 171-174
  10. Grujović N., Živković M., Kotsovos M., Pavlović M. and Kojić M., A Numerical Algorithm for Elastic-Plastic Analysis of One-Parameter Concrete Model, Complas 5, Barcelona, Spain, 1997, pp. 1469-1474
  11. Kojić M., Filipović N., Slavković R. and Živković M., Geometrically Nonlinear Analysis of Cam-Clay Type Porous Material With Fluid Flow, Complas 5, Barcelona, Spain, 1997, pp. 1375-1380
  12. Kojić M., Obradović D., Živković M., Bogdanović Z. and Vlastelica I., Dynamic Response of Car Body Under Loading Produced by the Propulsion Group, JUMY 16. International conference science and motor vehicles, Beograd, 1997, pp. 151-154
  13. Milovanović M., Bogdanović Z., Kanazir Z. and Živković M., The Modeling of the Impact of Windshield on Car Body Behavior, JUMV 16. International conference science and motor vehicles, Beograd, 1997, pp. 97-100
  14. Slavković R., Kojić M., Begović D. and Živković M., Modeling of Viscoplastic Metal Large Strain Deformation at Hot Working by a General Creep Model, Complas 5, Barcelona, Spain, 1997, pp. 1375-1380
  15. Slavković R., Kojić M., Grujović N., Živković M. and Obradović D., Finite Element Modeling of Frontal Car Crash, JUMV 16. International conference science and motor vehicles, Beograd, 1997, pp. 167-170
  16. Divac D., Vučković D., Živković M. and Grujović N., Numerical Modelling of Rock Mass Stress Strain Changes Caused by Underground Excavation in the Bor Copper Mine, 4th European conference on numerical methods in geotechnical engineering, Udine, Italy, 1998
  17. Kojić M., Bogdanović Z. and Živković M., Modelling of Front Part of Car Body with Propulsion Group as a Rigid Body, MVM International scientific symposium motor and vehicles and engines, Kragujevac, 1998, pp. 195-198
  18. Bogdanović Z., Kojić M. and Živković M., Analysis of Load Transfer Effects From Propulsion Group to Car Body While Braking, JUMV 17. International conference science and motor vehicles, Beograd, 1999, pp. 5-8
  19. Filipović N., Kojić M. and Živković M., Viscous Flow in a Collapsible Tube Solved as a Fluid-structure Interaction Problem, IASS-IACM 2000, Fourth International Colloquium on Computation of Shell & Spatial Structures, Chania-Crete, Greece, 2000, pp. 1-14
  20. Kojić M., Živković M., Slavković R., Grujović N. and Vlastelica I., A Procedure for Large Strain Elastic-plastic Analysis of Shells, IASS-IACM 2000, Fourth International Colloquium on Computation of Shell & Spatial Structures, Chania-Crete, Greece, 2000, pp. 1-14
  21. Živković M., Kojić M., Slavković R. and Grujović N., Nonlinear FE Analysis of Shell Structures by our Beam Superelement, IASS-IACM 2000, Fourth International Colloquium on Computation of Shell & Spatial Structures, Chania-Crete, Greece, 2000, pp. 1-20
  22. Miloradović N., Slavković M., Živković M., Milivojević N., Dynamic Behavior of Overhead Crane During the Operation of Hosting Mechanism, 4. Internacionalna Konferencija Teška Mašinogradnja – HM’02, Kraljevo, 2002, 28.-30. jun, pp. A.93-A.96.
  23. Vrekić S., Živković M., Milovanović M., Static Experiments of Thinwalled Girders with Complex Cross-section Using Finite Element Method, 4-ta Internacionalna konferencija Teška Mašinogradnja – HM’02, Kraljevo, 2002, 28.-30. jun, pp. F.25-F.28.
  24. Jovičić G., Živković M., Kojić M., Vujanac R., Modeling Arbitrary Planar Crack with the Fast Marching Method, 6. Međunarodno savetovanje o dostignućima elektro i mašinske industrije DEMI, Banja luka, 2003, 30. i 31. maj, pp. 381-386
  25. Kojić M., Filipović N., Vlastelica I., Živković M., Modeling of Blood Flow in the Human Aorta with use of an Orthotropic Nonlinear Material Model for the Walls, Second M.I.T. Conference on Computational Fluid and Solid Mechanics, USA, 2003, 17.-20. Jun, pp. 1751-1754
  26. Stefanović M., Mandić V., Živković M., Aleksandrović S., Fizičko i numeričko modeliranje defleksionih pojava kod tankih limova – Yoshida test, 6. Međunarodno savetovanje o dostignućima elektro i mašinske industrije DEMI, Banja luka, 2003, 30. i 31. maj, pp. 45-50
  27. Vrekić S., Živković M., Milovanović M., Prilog istraživanju tankozidnih nosača složenog preseka sa proračunom metodom konačnih elemenata, Nauka i motorna vozila 2003, Beograd, 2003, maj
  28. Vujanac R., Slavković R., Živković M., Primena metode konačnih elemenata u proračunima tankozidnih čeličnih konstrukcija – Proračun visokoregalnog skladišta Hemofarm-Banja Luka, 6. Međunarodno savetovanje o dostignućima elektro i mašinske industrije DEMI, Banja luka, 2003, 30. i 31. maj, pp. 459-464
  29. Jovičić G., Živković M., Jovičić N., Numerical Method Incorporated In the PAK Software for Determination of the Fracture Parameters, The First International Conference on Computational Mechanics (CM’04), Belgrade, 2004, Novemeber 15-17, pp. 1-11
  30. Mandić V., Živković M., Petrović M., Vulović S., Analiza procesa vučenja – eksperimentalna istraživanja i MKE simulacija, 30. JUPITER konferencija (26. simpozijum NU ROBOTI-FTS), Beograd, 2004, pp. 3.97-3.102.
  31. Lazić V., Živković M., Rakić D., Jovanović M., Adamović D., Theoretical-experimental determining of cooling time (T8/5) in hard facing, 5th International conference Heavy Mashinery HM′05, Kraljevo, 2005, 8. June - 03. July, pp. A.17-A.20.
  32. Živković M., Jovičić G., Slavković R., Grujović N., A Numerical Procedure for Structure Life Assessment, First International Conference on Computational Methods for Coupled Problems in Science and Engineering, Santorini Island, Greece, 2005, 25.-27. May, pp. 1-16
  33. Živković M., Kojić M., Vukadinović V., Vlastelica I., The Element-free Galerkin Method, 5th International conference Heavy Mashinery HM′05, Kraljevo, 2005, 28. June - 03. July, pp. C.5-C.8
  34. Živković M., Slavković R., Kojić M., Grujović N., Vuković M., Elastic-plastic analysis of spot-welded thin-walled structures, VIII International Conference on Computational Plasticity, COMPLAS VIII, CIMNE, Barcelona, 2005, 5.-8. September, pp. 1043-1046
  35. Adamović D., Stefanović M., Živković M., Lazić V., Uticaj različitih parametara na silu izvlačenja pri dubokom izvlačenju sa stanjenjem debljine zida, 31. Savetovanje proizvodnog mašinstva sa međunarodnim učešćem, Kragujevac, 2006, 19.-21. Septembar, pp. 171-180
  36. Divac D., Vuckovic D., Zivkovic M., Vulovic S., Reservoir, dam and rock mass interaction modeling, VI European Conference on Numerical Methods in Geotechnical Engineering, Graz, 2006, 6-8 September, pp. 721-726
  37. Đorđević N., Živković M., Vulović S., Grujović N., Comparative Analysis of FEM Software in solving dinamic problems, 5th Youth Symposium on Experimental Solid Mechanics, Puchov, Slovakia, 2006, 10.-13. Maj, pp. 1-6
  38. Mandić V., Marinković T., Živković M., FE analiza procesa istiskivanja aluminijumskih šupljih profila, 31. Savetovanje proizvodnog mašinstva sa međunarodnim učešćem, Kragujevac, 2006, 19.-21. Septembar, pp. 187-194
  39. Pavlović A., Cristiano F., Živković M., FEM Simulation for Comprehension of Experimental Results: The Case of an Automatic Changing Gear, 5th Youth Symposium on Experimental Solid Mechanics,, Puchov, Slovakia, 2006, 10.-13. Maj, pp. 1-6
  40. Pavlović A., Živković M., Vulović S., Grujović N., Strength Analysis of Safety Cage, 5th Youth Symposium on Experimental Solid Mechanics, Puchov, Slovakia, 2006, 10.-13. Maj, pp. 1-6
  41. Vulović S., Živković M., Grujović N., Mandić V., The Contact Problems Based the Penalty Method, 31. Savetovanje proizvodnog mašinstva sa međunarodnim učešćem, Kragujevac, 2006, 19.-21. Septembar, pp. 474-479
  42. Vulović S., Živković M., Grujović N., Slavković R., The 3D Contact Problems Based on the Penalty Method, First South-East European Conference on Computational Mechanics, SEECCM-06, Kragujevac, 2006, 28-30 June, pp. 28-335-341
  43. Živković M., Jovičić G., Vukadinović V., Djordjević N., Kojić M, Comparison of EFG, X-FEM and FEM in fracture mechanics analysis of a real structure, First South-East European Conference on Computational Mechanics, SEECCM-06, Kragujevac, 2006, 28.-30. June, pp. 209-215
  44. Živković M., Rakić D., Divac D., Stojkov S., Using of the Drucker-Prager material model in the calculation and analysis of tunnels, First South-East European Conference on Computational Mechanics, SEECCM-06, Kragujevac, 2006, 28.-30. June, pp. 325-334
  45. Adamović D., Stefanović M., Živković M., Eksperimentalne metode određivanja koeficijenta trenja pri dubokom izvlačenju sa stanjenjem debljine zida, VII Međunarodni naučno-stručni skup o dostignućima elektrotehnike, mašinstva i informatike, DEMI 2007, Banja Luka, Bosna i Hercegovina, 2007, 25. Maj – 26. Maj, pp. 199-206, ISBN 978-99938-39-15-6
  46. Divac D., Živković M., Vulović S., Slavković R., Modeling of Dam and Rock Mass Interaction, International Conference On Computational Methods for Coupled Problems in Science and Engineering COUPLED PROBLEMS 2007, Barcelona, 2007, 5-7 September
  47. Djordjevic N., Zivkovic M., Rakic D., Dynamic Analysis of Mechanism for Setting Down a Brake Pedal in Crashworthiness, 6th Youth Symposium on Experimental Solid Mechanics, Vrnjacka banja, 2007, 09 May – 12 May, pp. D3 201-204, ISBN 978-86-82631-39-2
  48. Jovičić G., Zivković, M., Vukadinović V, Numerical Methods of Determination Crack Growth on the Real Structure, 1st International Congress of Serbian Society of Mechanics, Kopaonik, 2007, 10-13 April, pp. 681-686, ISBN 978-86-909973-0-5
  49. Rakić D., Živković, M., Divac D., Drucker-Prager Material Model without Hardening, 1st International Congress of Serbian Society of Mechanics, Kopaonik, 2007, 10-13 April, pp. 811-816
  50. Rosic B., Matthies H.G., Zivkovic M., Ibrahimbegovic A., Formulation of a Heterogeneous Stochastic Elasto-Plastic Material, COMPLAS 2007, Barcelona, 2007, 5-7 September
  51. Rosić B., Živković M., Hyperelastic Material Model, 1st International Congress of Serbian Society of Mechanics, Kopaonik, 2007, 10-13 April, pp. 805-810, ISBN 978-86-909973-0-5
  52. Vulović S., Živković M., Grujović N., Pavlović A., The penalty methods applied to nonlinear contact problems, 1st International Congress of Serbian Society of Mechanics, Kopaonik, 2007, 10-13 April, pp. 741-746
  53. Zivkovic M., Rakic D., Divac D., Stojkov S., Application of Drucker-Prager material model in the tunnel analysis, Euro: Tun 2007, Vienna, 2007, 27-29 August
  54. Blagojevic M., Rakic D., Zivkovic M., Bogdanovic Z., Digitizing and Optical Measuring in Automotive Industry, International Congress Motor Vehicles & Motors 2008, Kragujevac, 2008, October 8th-10th
  55. Cukanovic D., Zivkovic M., Vulovic S., Disic A., Static and Fatigue Strength Assessment of a Hob on the Truck's Left Wheel, International Congress Motor Vehicles & Motors, Kragujevac, 2008, October 8th-10th, ISBN 978-86-86663-39-9
  56. Djordjevic N., Milovanovic V., Zivkovic M., Explicit Dynamics Analysis in Wagon Crash Application, International Congress Motor Vehicles & Motors 2008, Kragujevac, 2008, October 8th-10th
  57. Lazic V., Zivkovic M., Vukovic M., Slavkovic R., Experimental-numerical Method of Determination of the Most Appropriate Technology of Spot Welding, 25th Danubia-Adrla Symposium on Advances In Experimantal Mechanics, Ceske Budejovice, Czech Republic, 2008, 24-27 September, pp. 149-150, ISBN 978-80-01-04162-8
  58. Rakic D., Nikolic A., Zivkovic M., Slavkovic R., GID-PAK Interface, 4th Gill Conference 2008, Ibiza -Spain, 2008, May 5-9
  59. Jovičić G., Živković M., Vulović S., Jovičić N., Structural Integrity Aassessment of High-pressure Power Plant Turbine Housing, 9th International Conference Research and Development in Mechanical Industry RaDMI 2009, Vrnjačka Banja, 2009, 16 - 19. September, pp. 566-571, ISBN 978-86-83303-24-8
  60. Rosić B., Matthies H.G., Žiković M.. Ibrahimbegović A., Uncertainty and Plasticity: Stochastic Formulation and Computations, 2nd South-East European Conference on Computational Mechanics, SEECCM 2009, Island of Rhodes, Greece, 2009, 1-5 June, ISBN 978-86-7892-173-5
  61. Rosić B., Matthies H.G., Živković M., Stochastic Plasticity, 6th International Congress of Croatian Society of Mechanics (6th ICCSM), Dubrovnik, 2009, September 30 - October 2, ISBN 978-953-7539-10-8
  62. Rosic B., Matthies H.G., Zivkovic M. and Ibrahimbegovic A., Formulation and Computational Application of Inelastic Media with Uncertain Parameters, X International Conference on Computational Plasticity, COMPLAS X, Barcelona, 2009, 02-04 September, pp. 21, CD 343, ISBN 978-84-96736-69-6
  63. Stojanovic B., Zivkovic M., Slavkovic R., Numerical Integration for Assumed Strain Finite Elements, 2nd International Congress of Serbian Society of Mechanics (IConSSM 2009), Palic (Subotica), Serbia, 2009, 1-5 June
  64. Vulovic S., Zivkovic M., Grujovic N., Automatic Adjusment of Load Step for Contact Problems Based on the Penalty Method, 2nd International Congress of Serbian Society of Mechanics (IConSSM 2009), Palic (Subotica), Serbia, 2009, 1-5 June
  65. Vulovic S., Zivkovic M., Grujovic N., Slavkovic R., Contact Problem Solution by Finite Element Method, 9th International Conference Research and Development in Mechanical Industry RaDMI 2009, Vrnjačka Banja, 2009, 16 - 19. September 2009, pp. 637-642, ISBN 978-86-83303-24-8
  66. Živković M., Čukanović D., Milovanović V., Fatigue Strength Assessment of Vibration Transporter’s Motor Carrier, 9th International Conference Research and Development in Mechanical Industry RaDMI 2009, Vrnjačka Banja, 2009, 16 - 19. September, pp. 664-672, ISBN 978-86-83303-24-8
  67. Zivkovic M., Cukanovic D., Rakic D., Numerical Analysis of Delamination Zone due to High Impact Composite Materials, 2nd International Congress of Serbian Society of Mechanics (IConSSM 2009), Palic (Subotica), Serbia, 2009, 1-5 June
  68. Zivkovic M., Milovanovic V., Djordjevic N., Comparative Analysis of Implicit and Explicit Numerical Methods in Dynamic Problems Solving, 2nd International Congress of Serbian Society of Mechanics (IConSSM 2009), Palic (Subotica), Serbia, 2009, 1-5 June
  69. Zivkovic M., Rakic D., Vulovic S., Divac D., Slavkovic R., Seismic Dam Analysis, 8th Youth Symposium on Experimental Solid Mechanics, Gyor, Hungary, 2009, 20-23 May
  70. Blagojević M., Živković M., Algorithm for 3D Surface Reconstruction Based on Point Cloud Generated by Optical Measuring Techniques, International Congress Motor Vehicles & Motors 2010, Kragujevac, 2010, October 7th-9th, ISBN 978-86-86663-39-9
  71. Mandić V., Adamović D., Jurković Z., Stefanović M., Živković M., Ranđelović S., Marinković T., CAE Analysis of Ironing Process with Experimental Verification, International Scentific Conference, Menagement of Technology Step to Sustaniable Production, Rovinj, Croatia, 2010, 2-4 June, ISBN 978-953-7738-09-9
  72. Nikolić A., Dunić V., Živković M., Slavković R., Neutral File Generation for GiD Post-processing using PAK Subroutines Implemented in FEAP, 5th Conference On Advances And Applications Of GiD & 1st Kratos Workshop, Barcelona, Spain, 2010, 26-27 May
  73. Adamović D., Mandić V., Stefanović M., Aleksandrović S., Živković M., Golišija Z., Ranđelović S., Experimental and Numerical Determination of the Tensile Stresses in the Wall During Steel Sheet Ironing, 4th International conference ICMEN 2011, Thessaloniki, Greece, 2011, 6-7 October, pp. 621-630, ISBN 978-960-98780-4-3
  74. Adamović D., Stefanović M., Aleksandrović S., Živković M., Gulišija Z., The Influence of Various Process Parameters on Coefficient of Friction on Die at Ironing of AlMg3 Sheet Metals, 12th International Conference on Tribology, SERBIATRIB ’11, Kragujevac, Serbia, 2011, 11–13 May, pp. 342-348, ISBN 978-86-86663-74-0
  75. Adamović D., Stefanović M., Aleksandrović S., Živković M., Gulišija Z., Đačić S., The Influence of Tool Surface Condition on Ironing Process Execution, 34th International conference ICPE 2011, Niš, Serbia, 2011, 28-30 September, pp. 289-292, ISBN 978-86-6055-019-6
  76. Blagojević M., Živković M., Pavlović A., Quality Control of Contour Verifier Using Photogrammetric Measuring Systems, 34th INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING, Niš, Serbia, 2011, pp. 139-142, ISBN 978–86–6055–019–6
  77. Blagojević M., Živković M., Rosić B., Quality 3D Surface Reconstruction Based on Point Cloud Generated by Optical Measuring Techniques, 34th INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING, Niš, Serbia, 2011, pp. 343-346, ISBN 978–86–6055–019–6
  78. Blagojević M., Živković M., Slavković R., Electrostatic Field Analysis Using Heat Transfer Analogy, The 3rd International Conference of Serbian Society of Mechanics (IConSSM 2011), Vlasina lake, Serbia, 2011, 5-8 July, ISBN 978-86-909973-3-6
  79. Petrović R., Pezdirnik J., Živković M., Mathematical Modeling and Identification of Hydrodinamic Processes of a Piston Radial Pump, Mednarodne conference Fluidna tehnika 2011, Maribor, Slovenia, 2011, pp. 47-58, ISBN 978-961-248-290-9
  80. Petrović R., Živković M., Gašić M., Influence of Compressibility of Working Fluid on Hydrodynamic Processes in the Axial Piston Pump, 21st International Conference on Hydraulics and Pneumatics, Ostrava, Czech Republic, 2011, 1-3 June, pp. 189-195, ISBN 978-80-248-2430-7
  81. Petrović R., Živković M., Gašić M., Mathematical Modeling, Experimental Research and Optimization of Characteristic Parameters of the Valve Plate of the Axial Piston Pump/Motor, 8th JFPS International Symposium on Fluid Power, Okinawa, Japan, 2011, 25-28 October, pp. 125-132, ISBN 978-3-924813-97-0
  82. Rakić D., Živković M., Stress Integration of the Mohr-Coulomb Material Model Using Incremental Plasticity Theory, Third Serbian (28th Yu) Congress on Theoretical and Applied Mechanics, Vlasina lake, Serbia, 2011, 5-8 July, ISBN 978-86-909973-3-6
  83. Rakić D., Živković M., Vulović S., Divac D., Grujović N., The Incremental Plasticity Method Applied to the Drucker-Prager Material Model, Тhe Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Chania, Crete, Greece, 2011, 6-9 September, ISBN 978-1-905088-46-1
  84. Slavković R., Slavković V., Živković M., Dunić V., Stress Integration for FCC Crystal Plasticity by Finite Element Method, The 3rd International Conference of Serbian Society of Mechanics (IConSSM 2011), Vlasina lake, Serbia, 2011, 5-8 July, ISBN 978-86-909973-3-6
  85. Vulović S., Živković M., Grujović N., Slavković R., Comparative Study of Contact Problems Solution Based on the Penalty and Lagrange Multiplier, TCCM 2011 - Trends & Challenges in Computational Mechanics, Padua, Italy, 2011, 12-14 September
  86. Živković M., Dišić A., Hopkinson Bar as Most Usefully Technique in Material Testing at High Strain Rate, The 3rd International Conference of Serbian Society of Mechanics (IConSSM 2011), Vlasina lake, Serbia, 2011, 5-8 July, ISBN 978-86-909973-3-6
  87. Živković M., Nikolić R., Jovičić G., Vulović S., Maksimović S., Jovičić N., Lifetime Prediction of a Thermal Power Plant Component, 1st Central and Eastern European Conference on Thermal Analysis and Calorimetry, Craiova, Romania, 2011
  88. Živković M., Topalović M., Slavković R., Dunić V., Abaqus Subroutine Development and Implementation for Neo-Hook Hyperelastic Material Model, The 3rd International Conference of Serbian Society of Mechanics (IConSSM 2011), Vlasina lake, Serbia, 2011, 5-8 July, ISBN 978-86-909973-3-6
  89. Živković M., Vulović S., Divac D., Slavković R., Grujović N., Numerical Analysis of Dam and Rock Mass Interaction, Тhe Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Chania, Crete, Greece, 2011, 6-9 September, ISBN 978-1-905088-46-1
  90. Adamović D., Mandić V., Stefanović M., Jurković Z., Terčelj M., Živković M., Investigation of the Influence of Total Force and Punch Force in the Ironing of AlMg3 Alloy, International Conference Management of Technology – Step to Sustainable Production (MOTSP 2012), Zadar, Croatia, 2012, 14-16 June, pp. 320-327, ISBN 1847-6880
  91. Blagojević M. and Živković M., 3D Deformation Measurement of Car Body Parts Based on Point Cloud Generated by Optical Measuring Techniques, International Congress Motor Vehicles & Motors 2012 - MVM2012, Kragujevac, Serbia, 2012, 3-5 October, pp. 326-333, ISBN 978-86-86663-91-7
  92. Blagojević M. and Živković M., Visualization of Volumetric Models Obtained by Optical 3D Digitizing on Mobile Computing Platforms, International Conference on Applied Internet and Information Technologies ICAIIT 2012, Zrenjanin, Serbia, 2012, 26 October, pp. 322-325, ISBN 978-86-7672-173-3
  93. Blagojević M., Dišić A., Živković M., Application of O3D Plug-In in Development of Educational Web Based Application for Interactive Exploration of 3D Digitized Data, International Conference on Applied Internet and Information Technologies ICAIIT 2012, Zrenjanin. Serbia, 2012, 26 October, pp. 331-334, ISBN 978-86-7672-173-3
  94. Blagojević M., Dišić A., Živković M., Slavković R., Verification of Deformation Measurement Results Using Optical Measuring System TRITOP, 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics, Beograd, Serbia, 2012, 26-29 September, pp. 290-293, ISBN 978-86-7083-762-1
  95. Blagojević M., Nikolić A., Živković M., Živković M., Stanković G., Remote Visualization of Finite Element Calculation Results in Vascular Interventions Decision Making, International Conference on Applied Internet and Information Technologies ICAIIT 2012, Zrenjanin, Serbia, 2012, 26 October, pp. 326-330, ISBN 978-86-7672-173-3
  96. Blagojević M., Živković M., PAK-DCF – Multiphysics Software Modul for FEM Simulation of Current Flow Problems, 12th International Conference Research and Development in Mechanical Industry RaDMI 2012, Vrnjačka Banja, Serbia, 2012, 13-17 September, pp. 804-808, ISBN 978-86-6075-037-4
  97. Blagojević M., Živković M., User-Generated Reference Objects in Photogrammetric 3D Measurement and Quality Control, 6th International Quality Conference, Kragujevac, Serbia, 2012, 8 June, pp. 569-574, ISBN 978-86-86663-82-5
  98. Blagojević M., Živković M., Nikolić A., The Influence of the DSLR Camera Shutter Count on The Accuracy of the Photogrammetric Measurements, Conference on Mechanical Engineering Technologies and Applications - COMETa 2012, Jahorina, Bosnia and Herzegovina, 2012, 28-30 November, pp. 601-606, ISBN 978-99938-655-4-4
  99. Blagojević M., Živković M., Topalović M., Registration and Surface Inspection of Automotive Pressed Parts Based on Point Cloud Generated by Optical Measuring Techniques, International Congress Motor Vehicles & Motors 2012 - MVM2012, Kragujevac, Serbia, 2012, 3-5 October, pp. 334-339, ISBN 978-86-86663-91-7
  100. Busarac N., Vulović S., Živković M., Topalović M., Janošević M., Thermal Analysis of High Power Reduction Gearbox, 1st International Scientific Conference COMETa 2012 Conference on Mechanical Engineering Technologies and Applications, Jahorina, Bosnia and Herzegovina, 2012, 28-30 November, pp. 355-358, ISBN 978-99938-655-4-4
  101. Dišić A., Živković M., Milovanović V., Blagojević M., Some Aspects in Design of Split Hopkinson Tension Bar, 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics, Belgrade, Serbia, 2012, 26-29 September, pp. 294-297, ISBN 978-86-7083-762-1
  102. Milovanović V., Rakić D., Živković M., Vulović S., Milutinović M., Thermo-Mechanic Analysis of Cement Transport Wagon - Identification of the Cause of Cracks, 1st International Scientific Conference COMETa 2012 Conference on Mechanical Engineering Technologies and Applications, Jahorina, Bosnia and Herzegovina, 2012, 28-30 November, pp. 221-228, ISBN 978-99938-655-4-4
  103. Milovanović V., Živković M., Dišić A., Rakić D., Comparative Results of Wagon Stresses Obtained by Measuring with Strain Gauges and Stresses Obtained by FEM Calculation, 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics, Belgrade, Serbia, 2012, 26-29 September, pp. 298-301, ISBN 978-86-7083-762-1
  104. Nikolić A., Blagojević M., Milovanović V., Živković M., Milutinović M., Analysis of Heat Transfer Through the Beam Support of the Wagon Structure Calculated by Software PAK-Multyphisics, Conference on Mechanical Engineering Technologies and Applications - COMETa 2012, Jahorina, Bosnia and Herzegovina, 2012, 28-30 November, pp. 251-254, ISBN 978-99938-655-4-4
  105. Nikolić A., Blagojević M., Živković M., Aleksić A., Petrović R., Influence of Mesh Quality on Fluid Flow Calculated with Software PAK-F Explicit, 6th International Quality Conference, Kragujevac, Serbia, 2012, 8 June, pp. 561-568, ISBN 978-86-86663-82-5
  106. Nikolić A., Blagojević M., Živković M., Živković M., Stanković G., PAK-FS – Multiphysics Software Modul for Fluid-Structure Interaction Simulations, RaDMI 2012 - 12th International Conference Research and Development in Mechanical Industry, Vrnjačka Banja, Serbia, 2012, 13-17 September, pp. 726-731, ISBN 978-86-6075-037-4
  107. Vulović S., Busarac N., Živković M., Topalović M., Improvement and Integration of FEM Solution Used for R&D into FEMAP, 1st International Scientific Conference COMETa 2012 Conference on Mechanical Engineering Technologies and Applications, Jahorina, Bosnia and Herzegovina, 2012, 28-30 November, pp. 255-262, ISBN 978-99938-655-4-4
  108. Zivkovic J., Jovicic G., Zivkovic M., Slavkovic R., Accuracy Analysis of Extended Finite Element Method for Tension of Plate With a Central Crack, 11th Youth Symposium on Experimental Solid Mechanics, Brasov, Romania, 2012, 30 May - 2 June, pp. 98-103, ISBN 978-606-19-0078-7
  109. Adamović D., Mandić V., Stefanović M., Aleksandrović S., Živković M., Analysis of the Temperature Change on the Tool and Work Piece During the Ironing Process, 11th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI 2013, Banja Luka, Bosnia and Herzegovina, 2013, pp. 299-306
  110. Adamović D., Stefanović M., Aleksandrović S., Živković M., Živić F., Topalović M., Analysis of Tribological Process During Ironing of Sheet Metal Made of AlMg3, SERBIATRIB'13 - 13th International Conference on Tribology, Kragujevac, Serbia, 2013, 15-17 May, pp. 265-269, ISBN 978-86-86663-98-6
  111. Blagojević M., Nikolić A., Živković M., Živković M., Stanković G., Role of Oscillatory Shear Index in Predicting the Occurence and Development of Plaque, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, Serbia, 2013, 4-7 June, pp. 821-824, ISBN 978-86-909973-5-0
  112. Blagojević M., Živković M., Verification of Thermo-mechanical Coupling Implemented in Software PAK Multiphysics on the Example of Radiofrequency Ablation, Twelfth Young Researchers' Conference Materials Sciences and Engineering, Belgrade, Serbia, 2013, December 11-13, ISBN 978-86-80321-28-8
  113. Blagojević M., Živković M., Verification of Electro-mechanical Coupling Implemented in Software PAK Multiphysics on the Example of Piezoelectric Transducers, Twelfth Young Researchers' Conference Materials Sciences and Engineering, Belgrade, Serbia, 2013, December 11-13, ISBN 978-86-80321-28-8
  114. Blagojević M., Živković M., Development of Software PAK-M for Calculation of Magnetostatic Field, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, Serbia, 2013, 4-7 June, pp. 729-734, ISBN 978-86-909973-5-0
  115. Dišić A., Živković M., Milovanović V., Numerical Determination of Parameters of Johnson-Cook Material Model, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, Serbia, 2013, 4-7 June, pp. 491-496, ISBN 978-86-909973-5-0
  116. Dunić V., Slavković R., Busarac N., Slavković V., Živković M., Implicit Integration Method of Shape Memory Alloys Constitutive Model, SEECCM III - 3rd South-East European Conference on Computational, Kos Island, Greece, 2013, 12-14 June
  117. Milovanović V., Jovičić G., Živković M., Rakić D., Dišić A., Analysis of Influence Choice Fatigue Failure Criteria to Assess the Integrity of Wagon Structure Parts, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, Serbia, 2013, 4-7 June, pp. 509-515, ISBN 978-86-909973-5-0
  118. Petrović R., Živković M., Todić N., Investigations of Flow Rate Ripple and Pressure Pulsation of Radial Piston Pump, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, Serbia, 2013, 4-7 June, pp. 243-248, ISBN 978-86-909973-5-0
  119. Rakić D., Živković M., Milovanović V., Milivojević N., Divac D., Stress Integration on Matsouka-Nakai Constitutive Model Using Incremental Plasticity Method, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, Serbia, 2013, 4-7 June, pp. 503-508, ISBN 978-86-909973-5-0
  120. Rakić D., Živković M., Vulović S., Divac D., Slavković R., Milivojević N., Embankment Dam Stability Analysis using FEM, SEECCM III - 3rd South-East European Conference on Computational Mechanics, Kos Island, Greece, 2013, 12-14 June
  121. Topalović M., Ivanović M., Živković M., Dišić A., Comparison of FEM and SPH Methods Used for Analysis of Solid Bodies, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, Serbia, 2013, 4-7 June, pp. 401-406, ISBN 978-86-909973-5-0
  122. Živković J., Jovičić G., Maksimović S., Vulović S., Živković M., Using the Experimental and Numerical Methods in the Determination of Stable Crack Growth, 12th Youth Symposium on Experimental Solid Mechanics, Bari, Italy, 2013, 21-24 April
  123. Živković J., Jovičić G., Vulović S., Stepanović Ž., Živković M., The Numerical Assessment of the Structural Integrity of the Tibia-Implant Using Failure Criteria, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, Serbia, 2013, 4-7 June, pp. 497-502, ISBN 978-86-909973-5-0
  124. Blagojević M., Erić J., Knežević Lj., Živković M., Tihaček Šojić Lj., Numerical Modeling of the Edentulous Mandible With a Complete Denture Using Multiblock Method, 2nd International Scientific Conference COMETa 2014, Bosnia and Hercegovina, Republic of Srpska, Jahorina, 2014, 2-5 December, pp. 321-326, ISBN 978-99976-623-1-6
  125. Blagojević M., Ivanović L., Nikolić A., Živković M., Zahar-Djordjević M., Quality Improvement of Engineering Education: Design of an Application for Learning Technical Drawing, 8th International Quality Conference, Kragujevac, Serbia, 2014, 23 May, pp. 863-868, ISBN 978-86-6335-004-5
  126. Blagojević M., Topalović M., Živković M., Improvement of End-User Experience by Development of Pre- And Post-Processing Solution for FEM Magnetostatic Solver PAK-M, 8th International Quality Conference, Kragujevac, Serbia, 2014, 23 May, pp. 409-416, ISBN 978-86-6335-004-5
  127. Blagojević M., Živković M., Quality Control of Parts and Assemblies Using Software GOM Inspect Based on Portable CMM Data, 8th International Quality Conference, Kragujevac, Serbia, 2014, 23 May, pp. 913-918, ISBN 978-86-6335-004-5
  128. Blagojević M., Živković M., Deformation Measurement of Furniture Built Using Plywood Panel, 8th International Quality Conference, Kragujevac, Serbia, 2014, 23 May, pp. 767-774, ISBN 978-86-6335-004-5
  129. Čukanović D., Blagojević M., Vulović S., Živković M., Analysis of Pre-Stresses Caused by Wire Tension of Stone Cutting Machine, 2nd International Scientific Conference COMETa, Jahorina, B&H, Republic of Srpska, 2014, 2nd-5th December, pp. 459-462, ISBN 978-99976-623-1-6
  130. Petrović R., Živković J., Topalović M., Živković M., Jovičić G., Analytical Stress Calculation in Spherical Tank and Experimental Verification, XIII Youth Symposium on Experimental Solid Mechanics, Decin, Czech Republic, 2014, 29 June - 2 July, pp. 92-95, ISBN 978-80-01-05556-4
  131. Radovanović S., Rakić D., Divac D., Živković M., Stress-Strain Analysis and Global Stability of Tunnel Excavation, 2nd Conference for PhD students in Civil Engineering, Cluj-Napoca, Romania, 2014, 10-13 December, pp. 1-8
  132. Topalović M., Milovanović V., Blagojević M., Dišić A., Rakić D., Živković M., Freight Wagon Mass Reduction using Parametric Optimisation, VIII International Conference „Heavy Machinery-HM 2014“, Zlatibor, Serbia, 2014, 25-28 June, pp. E.53-60, ISBN 978-86-82631-74-3
  133. Živković M., Topalović M., Blagojević M., Nikolić A., Milovanovć V., Mesarović S., Padbidri J., Boundary Identification And Weak Periodic Condition Application In DEM Method, 2nd International Scientific Conference COMETa, Jahorina, B&H, Republic of Srpska, 2014, 2nd-5th December, pp. 365-370, ISBN 978-99976-623-1-6

 

Саопштење са међународног скупа штампано у изводу

 

Čukanović D., Radaković A., Živković M., Application of the progressive failure criteria in determining delamination of multilayer composite materials with an interlayer crack, Ninth Young Researchers' Conference - Materials Science and Engineering, Belgrade, Serbia, 2010, 20-22 December

Živković M., Milovanović V., Ćirović V., Rakić D., Vujanac R., Application of Special Developed Contact Finite Element for Buffing Impact Test, 27th Danubia-Adria Symposium, Wroclaw, Poland, 2010, 22-25 September, pp. 247-248, ISBN 978-83-87982-59-1

Živković M., Milovanović V., Rakić D., Vulović S., Vujanac R., Fatigue Strength Assesment of Welded Joints of Wagon’s Constructions, 27th Danubia-Adria Symposium, Wroclaw University of Technology, Wroclaw, Poland, 2010, 22-25 September, pp. 245-246, ISBN 978-83-87982-59-1

Dunić V., Slavković R., Busarac N., Slavković V., Živković M., Implicit Stress Integration Method of Shape Memory Material Model, 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Novi Sad, Serbia, 2013

Rakić D., Živković M., Milovanović V., Stress Integration of the Hoek-Brown Material Model Using Incremental Plasticity Theory, 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics-GAMM, Novi Sad, Serbia, 2013, 18-22 March, pp. 157-158

 

Монографија националног значаја, монографско издање грађе, превод изворног текста у облику монографије (само за старе језике)

 

М. Којић, Р. Славковић, М. Живковић, Н. Грујовић, Метод коначних елемената I (линеарна анализа), Машински факултет у Крагујевцу, ISBN 86-80581-27-5, Крагујевац, 1998

Б. Новаковић и група коаутора (М. Којић, М. Росић, Д. Вуловић, М. Новаковић, М. Радосављевић, Н. Филиповић, М. Живковић), Васкуларна доплер ултрасонографија, Центар за научна истраживања САНУ, Универзитет у Крагујевцу и Призма Крагујевац, ISBN 86-7084-033-2, Крагујевац, 1999

Divac D., Vučković D., Živković M., Stojkov S., Vulović S., Modeliranje interakcije jezera, pregradne konstrukcije i stenske mase na primeru brane Bogovina na Crnom Timoku, Upravljanje vodnim resursima Srbije ’05, Institut za vodoprivredu „Jaroslav Černi“, ISBN 86-82565-14-5, Beograd, 2005

Мирослав Живковић, Нелинеарна анализа конструкција, Машински факултет у Крагујевцу, ISBN 86-80581-59-3, Крагујевац, 2006

Jovičić G., Živković M., Vulović S., Proračunska mehanika loma i zamora, Mašinski fakultet Kragujevac, ISBN 978-86-86663-65-8, Kragujevac, 2011

 

Рад у водећем часопису националног значаја

 

Petronijević Z., Kojić M., Živković M., Kalinić Z. i Miličić B., Analysis of Acoustic Modes of Car Exhaust System, Zastava, Vol.-, No.33, pp. 18-26, ISSN -, 1998

Vehauc A., Kojić M., Živković M. and Jovanović Z., Assessment of the Remaining Lifetime of the Drum in Thermal Power Plant, Tehnika, Vol.-, No.55, pp. 81-84, ISSN -, 2000

Divac D., Vučković D., Živković M., Modeliranje filtracionih i naponsko-deformacionih procesa u interakciji akumulacionog jezera, brane i stenske mase, na primerima brane Sv. Petka u Makedoniji i brane Prvonek kod Vranja, Građevinski kalendar, Vol.-, No.-, pp. 9-57, ISSN -, 2004

Jovičić G., Živković M., Jovičić N., Numerical modeling of crack growth using the level set fast marching method, FME Transaction, Vol.33, No.1, pp. 11-19, ISSN -, 2004

Kojić M., Vlastelica I. and Živković M., Implicit stress integration algorithm for Gurson model in case of large strain shell deformation, Facta universitatis, Series: Mechanics, Automatic Control and Robotics, Vol.4, No.16, pp. 85-99, ISSN -, 2004

Živković M., Vuković M., Milovanović M., Vujanac R., An application of gap element in calculation of crash of thin-walled structures by FEM, Magazine for science in pratice “ZASTAVA”, Vol.-, No.39, pp. 9-16, ISSN -, 2004

Adamović D., Mandić V., Terčelj M., Stefanović M., Živković M., Investigation of Ironing Process Depending on Applied Tool Materials and Coatings, RMZ – Materials and Geoenvironment, Vol.59, No.1, pp. 27-40, ISSN 1408-7073, 2012

Adamović D., Mandić V., Živković M., Gulišija Z., Stefanović M., Topalović M., Aleksandrović S., Numerical Modeling of Ironing Process, Journal for Technology of Plasticity, Vol.38, No.2, pp. 109-124, ISSN 0354-3870, 2013

Čukanović D., Živković M., Jakovljević A., Savić S., Applying numerical method in the strength calculation of high pressure steamline, Journal of Applied Engineering Science, Vol.11, No.2, pp. 99-105, ISSN 1451-4117, 2013

 

Рад у часопису националног значаја

 

  1. Adamović D., Stefanović M., Lazić V., Živković M., Estimation of Lubricants for Ironing of Steel Pieces, Tribology in industry, Vol.26, No.1 2, pp. 12'21, ISSN -, 2004
  2. Adamovic D., Stefanovic M., Lazic V., Živković M., Influence of tribological conditions on the sheet metal surface roughness at multiphase ironing, Journal of the Balkan Tribological Association, Vol.11, No.4, pp. 499-509, ISSN 1310-4772, 2005
  3. Adamovic D., Stefanovic M., Lazic V., Živković M., Evaluation of lubricants for pressing of aluminium pieces, Tribologia, Vol.2005, No.5, pp. 9-34, ISSN -, 2005
  4. Adamović D., Stefanović M., Lazić V., Živković M., Estimation of Lubricants for Ironing of Aluminium Pieces, TRIBOLOGIA – TEORIA I PRAKTIKA, Vol.-, No.5, pp. 9-30, ISSN 0208-7774, 2005
  5. Adamović D., Stefanović M., Živković M., Živić F., Investigation of Influence og Tribological Conditions on Friction Coefficient During Multiphase Ironing for Steel and Aluminium Sheet Metal, Tribology in industry, Vol.28, No.3-4, pp. 29-34, ISSN 0354-8996, 2006
  6. Mandić V., Stefanović M., Živković M., Grujović N., Mišić B., FE analysis of tube forming process with experimental verification, Journal of Achievements in Materials and Manufacturing Engineering JAMME, Vol.18, No.1,2, pp. 303-306, ISSN -, 2006
  7. Adamović D., Stefanović M., Živković M., Živić F., Estimation of Lubricants for Ironing of Steel Pieces, Tribology in industry, Vol.29, No.3-4, pp. 21-27, ISSN 0354-8996, 2007
  8. Lazić V., Živković M., Nikolić R., Jovanović M., Theoretical-experimental Determining of Cooling Time (t8/5) in Hard Facing of Steels for Forging Dies. Part I: Determination of the Cooling Time (t8/5) Based on the Theoretical Temperature Cycles and Empirical Expressions, Materials Engineering Journal, Vol.9, No.1, pp. 18-22, ISSN -, 2007
  9. Jovičić G., Živković M., Maksimović K., Đorđević N., Analiza širenja prsline kod realnih konstrukcija primenom X-FEM i EFG metodama, Scientific Technical Review, Vol.58, No.2, pp. 21-26, ISSN -, 2008
  10. Vulović S., Živković M., Grujović N., The Contact Problems Based On The Penalty Method, Scientific Technical Review, Vol.58, No.3-4, pp. 33-35, ISSN -, 2008
  11. Adamović D., Stefanović M., Aleksandrović S., Gulišija Z., Živković M., Živić F., Analysis of the Surface State of Tools Influence on the Ironing Process, Journal for Technogy of Plasticity, Vol.36, No.2, pp. 111-120, ISSN 0354-3870, 2011
  12. Blagojević M., Živković M., Algorithm for 3D Surface Reconstruction Based on Point Cloud Generated by Optical Measuring Techniques, Mobility and Vehicle Mechanics, Vol.37, No.1, pp. 63-77, ISSN 1450-5304, 2011
  13. Blagojević M., Dišić A., Živković M., CMM2DEFORMATION - Softver za određivanje deformacija na osnovu fotogrametrijskih merenja, Tehnika, Vol.62, No.4, pp. 670-678, ISSN 0461-2531, 2013
  14. Blagojević M., Nikolić A., Živković M., Savić S., Fluid Structure Interaction On The Example Of Real Artery Bifurcation Of Random Selected Patient, Technics – Mechanical Engineering, Vol.68, No.1, pp. 59-66, ISSN 0040-2176, 2013
  15. Blagojević M., Nikolić A., Živković M., Savić S., Interakcija solida i fluida na primeru realne geometrije arterijske bifrukacije slučajno izabranog pacijenta, Tehnika, Vol.62, No.3, pp. 459-465, ISSN 0461-2531, Doi 616.154:532.54, 2013
  16. Blagojević M., Nikolić A., Živković M., Živković M., Stanković G., Pavlović A., Role of Oscillatory Shear Index in Predicting the Occurrence and Development of Plaque, Journal of the Serbian Society for Computational Mechanics, Vol.7, No.2, pp. 29-37, ISSN 1820-6530, 2013

Рад у научном часопису

  1. Mandić V., Živković M., Vulović S., Marinković T., FEM analysis for the extrusion process of tube using porthole dies, Journal for Technology of Plasticity, Vol.29, No.1,2, pp. 35-42, ISSN -, 2004
  2. Jovicic G., Zivkovic M., Jovicic N., Extended Finite Element Method for Two-dimensional Crack Modeling, Journal of the Serbian Society for Computational Mechanics, Vol.1, No.1, pp. 184-196, ISSN -, 2007
  3. Vulovic S., Zivkovic M., Grujovic N., Slavkovic R., A comparative Study of Contact Problems Solution Based on the Penalty and Lagrange Multiplier Approaches, Journal of the Serbian Society for Computational Mechanics, Vol.1, No.1, pp. 174-183, ISSN -, 2007
  4. Rakić D., Živković M., Slavković Radovan, Kojić M., Stress integration for the Drucker-Prager material model without hardening using the incremental plasticity theory, Journal of Serbian Society for Computational Mechanics, Vol.2, No.1, pp. 80-89, ISSN -, 2008
  5. Adamović D., Stefanović M., Gulišija Z., Aleksandrović S., Živković M., Devedžić G., Changing of Tension Stress of ironed Aluminum Work Piece Wall, Journal for Technology of Plasticity, Vol.34, No.1-2, pp. 69-78, ISSN 0354-3870, 2009
  6. Blagojević M., Živković M., Algorithm for 3D Surface Reconstruction based on Point Cloud generated by Optical Measuring Techniques, Mobility and Vehicle Mechanics, Vol.37, No.1, pp. 63-77, ISSN 1450-5304, 2011
  7. Blagojević M., Nikolić A., Živković M., Živković M., Stanković G., Remote Visualization of Finite Element Calculation Results in Vascular Interventions Decision Making, E-Society Journal Research and Applications, Vol.3, No.1, pp. 326-330, ISSN 2217-3269, 2012
  8. Dunić V., Busarac N., Rakić D., Slavković V., Slavković R., Živković M., Termomechanical coupling procedure using partitioned approach - Application to arc welding simulation, Journal of the Serbian Society for Computational Mechanics, Vol.6, No.1, pp. 29-40, ISSN 1820-6530, 2012
  9. Nikolić A., Blagojević M., Živković M., Aleksić A., Savić S., Software Technologies for the Analysis of Blood Flow in the Human Body, International Journal of Industrial Engineering and Management, Vol.3, No.2, pp. 99-104, ISSN 2217-2661, 2012
  10. Milovanović V., Živković M., Dišić A., Rakić D., Živković J., Experimental and Numerical Strength Analysis of Wagon for Transporting Bulk Material, IMK-14 – Research & Development, Vol.20, No.2, pp. EN61-66, ISSN 0345-6829, 2014

 

Саопштење са скупа националног значаја штампано у целини

  1. Slavković R. and Živković M., Nonlinear transient heat transfer in anisotropic materials, 18. Yugoslav congress of Theoretical and Applied Mechanics, Vrnjačka Banja, 1988, pp. 41-44
  2. Grujović N., Kojić M., Slavković R. and Živković M., Contact surfaces discretization by finite element method, 20. Yugoslav congress of Theoretical and Applied Mechanics, Kragujevac, 1993, pp. 76- 79
  3. Kojić M., Slavković R. and Živković M., Large inelastic deformation of shells, 20. Yugoslav congress of Theoretical and Applied Mechanics, Kragujevac, 1993, pp. 64-67
  4. Slavković R., Živković M. and Kojić M., Enhanced 8-node three dimensional solid and 4-node shell elements with incompatible modes, 20. Yugoslav congress of Theoretical and Applied Mechanics, Kragujevac, 1993, pp. 52-55
  5. Kojić M., Slavković R., Živković M. i Grujović N., Domestic Package "PAK" for linear and nonlinear structural analysis, heat conduction and fluid mechanics, CAD forum, Novi Sad, 1994, pp. 130-135
  6. Grujović N., Kojić M., Slavković R., Živković M., Mitrović S., Filipović N. and Gojković S., Graphical Pre- and Post-Processing in SAN Software for Linear and Nonlinear Structural Analysis, Heat Transfer and Fluid Flow, CAD forum, Novi Sad, 1995, pp. 187-192
  7. Kojić M., Slavković R., Grujović N. and Živković M., Proračun kompozitnih konstrukcija metodom konačnih elemenata u lineamoj i nelineamoj oblasti, Prvo Jugoslovensko savetovanje "Vlaknima ojačani kompoziti u industriji motornih vozila", Kragujevac, 1995, pp. 12-19
  8. Kojić M., Slavković R., Živković M., Petrović R. and Filipović N., Accuracy Analysis of Solution of Viscous Incompressible Fluid Flow with Heat Transfer by Finite Element Method, 21. Yugoslav congress of Theoretical and Applied Mechanics, Nis, 1995, pp. 83-88
  9. Kojić M., Živković M., Grujović N. and Slavković R., Elasto-Plastic Analysis of Beam Finite Element of Deformable Cross-Section, 21. Yugoslav congress of Theoretical and Applied Mechanics, Nis, 1995, pp. 480-485
  10. Kojić M., Zloković D. i Živković M., Elasto-Plastic Analysis of Initially Symmetric Structures Under Nonsymmetric loading by Application of Group Theory, 21. Yugoslav congress of Theoretical and Applied Mechanics, Nis, 1995
  11. Živković M. i Kojić M., A Thin-Walled Beam Superelement with Deformable Cross-Section, Repertory of papers of Faculty of Mechanical Engineering, Kragujevac, 1995, pp. 19-28
  12. Živković M., Kojić M., Slavković R. and Grujović N., A Beam Finite Element with Deformable Cross-Section and General Geometry, Mechanics, Materials and Construction, Scientific Meeting of the Serbian Academy of Sciences and Arts, Vol. LXXXIII, Department of Technical Sciences, Book 2, Beograd, 1995, pp. 61-68
  13. Divac D., Vučković D., Kojić M., Slavković R., Grujović N. and Živković M., Application of Finite Element Method on modelling process of stress strain changes caused by undrground excavation, 22. Yugoslav congress of theoretical and applied mechanics, Vrnjačka Banja, 1997
  14. Kojić M., Bogdanović Z., Slavković R., Živković M. and Grujović N., A FEM Procedure for Modeling of Structures Containing Rigid Bodies, 22. Yugoslav congress of theoretical and applied mechanics, Vrnjačka Banja, 1997, pp. 29-34
  15. Milovanović M., Živković M. i Bogdanović Z., Calculation of the Passenger Car Supporting Structure Elements in the Initial Design Stage, -, Novi Sad, 1997, pp. 213-220
  16. Slavković R., Živković M., Kojić M. and Grujović N., Large Strain Elastoplastic Analysis Using Incompatible Displacements, 22. Yugoslav congress of theoretical and applied mechanics, Vrnjačka Banja, 1997, pp. 61-66
  17. Živković M., A Formulation of General Beam Finite Element with Deformable Cross-Section, 22. Yugoslav congress of theoretical and applied mechanics, Vrnjačka Banja, 1997, pp. 35-40
  18. Vrekić S., Živković M., Milovanović M., Statička ispitivanja tankozidnih nosača sa proračunom metodom konačnih elemenata, MVM 2002, Kragujevac, 2002, 7.-9. Oktobar, pp. 169-172
  19. Живковић М., Вуловић С., Којић М., Ђорђевић В., Биљановски Ђ., Јаковљевић А., Ковачевић Б., Утицај моделирања на процену преосталог радног века бубња термоелектране, Саветовање са међународним учешћем IБР 2002 „Европски трендови – примена у Југославији“, Тара, 2002, 25-29. Новембар, pp. 283-290
  20. Divac D., Vučković D., Živković M., Modeliranje filtracionih i naponskih deformacionih procesa u interekciji akomulacionog jezera, brane i stenske mase, na primeru lučne brane Sv. Petka u Makedoniji, Jugoslovensko društvo za visoke brane – JDVB, Drugi kongres, Kladovo, 2003, pp. 481-488
  21. Jakovljević A., Živković M., Plešinac D., Đurđević G., The role of stress analysis in condition assessments for high pressure steam pipelines in thermal power plants, Power plants 2004, Symposium with International Participation, Vrnjačka Banja, 2004, 02-05 Novembar, pp. 1-8
  22. Miloradović N., Slavković R., Živković M., Vujanac R., Dinamičko ponašanje noseće konstrukcije mosne dizalice pri radu mehanizma za dizanje tereta, Naučno-stručni skup IRMES’04, Kragujevac, 2004, 16.-17. septembar, pp. 233-238
  23. Slavković R., Živković M., Grujović N., Vujanac R., Jovičić G., The application of finite elements method in modern engineering practice, Konferencija Savremena Građevinska Praksa 2004., Novi Sad, 2004, 15.-16. april, pp. 1-11
  24. Vrekić S., Živković M., Milovanović M., Statičke analize standardnih i ojačanih nosača putničkog automobile, MVM 2004., Kragujevac, 2004, okobar, pp. 15-22
  25. Živković M., Jovičić G., Vujanac R., Vulović S., Influence choice of FE meshing toward determinate amount of Stress Intensity Factors, IBR’04, Bečići, 2004, maj, pp. 149-154
  26. Živković M., Vujanac R., Vulović S., MKE analiza multimedijalnog filtra, Seminar CAD/CAE ’04 “Računarom podržano konstruisanje”, Mašinski fakultetu u Nišu, katedra za mašinske konstrukcije, 2004, 11. februar, pp. 1-15
  27. Adamović D., Stefanović M., Lazić V., Živković M., Istraživanje tipova promene koeficijenta trenja na putu klizanja pri dubokom izvlačenju sa stanjenjem debljine zida, YUTRIB '05, Kragujevac, 2005, 15. June - 18. June, pp. 738-744, ISBN 86-80581-78
  28. Živković M., Jovičić G., Vulović S., Extended finite element method for two-dimensional crack modeling, 25-th Yugoslav Congress on Theoretical and Applied Mechanics, Novi Sad, 2005, 1-3 Jun, pp. 105(1-14)
  29. Živković M., Jovičić G., Vulović S., Đorđević N., Residual life-time estimation of thermal plant component, 12. Simpozijum termičara, Sokobanja, 2005, 18.-21. oktobar, pp. 1-6
  30. Đorđević N., Živković M., Rakić D., Vitošević N., Dinamička analiza mehanizma za obaranje pedale kočnice u slučaju crash-a, DAN RAZISKAV – CIMOS 2006, Kopar, Slovenija, 2006, 17. Novembar, pp. 195-199, ISBN 961-91902-0-3
  31. Milenković P., Zogović M., Živković M., Pavlović A., Orbanić P., Mehanizam za samopodešavanje ručne kočnice, DAN RAZISKAV – CIMOS 2006, Kopar, Slovenija, 2006, 17. Novembar, pp. 147-150, ISBN 961-91902-0-3
  32. Vitošević N., Srećković N., Živković M., Blagojević M., Orbanić P., Crash system pedalnog sklopa, DAN RAZISKAV – CIMOS 2006, Kopar, Slovenija, 2006, 17. Novembar, pp. 147-150, ISBN 961-91902-0-3
  33. Vulović, S., Zivković, M., Grujović, The contact problems based on the penalty method, 31. Savetovanje proizvodnog mašinstva Srbije i Crne Gore, Kragujevac, 2006, pp. 474-479
  34. Živković M., Jovičić G., Maksimović S., Vulović S., Procena preostale čvrstoće osnovne opreme termoblokova, DAN RAZISKAV – CIMOS 2006, Kopar, Slovenija, 2006, 17. Novembar, pp. 251-260, ISBN 961-91902-0-3
  35. Živković M., Vukadinović V., Vulović S., Razvoj epruvete za niskociklični zamor, DAN RAZISKAV – CIMOS 2006, Kopar, Slovenija, 2006, 17. Novembar, pp. 32-37, ISBN 961-91902-0-3
  36. Milovanović V., Čukanović D., Živković M., Symbolic programming aplication in the elasto-plastic material model development, Fourteenth conferency YUINFO 2008, Kopaonik, 2008, 09th - 12th March, ISBN 978-86-85525-03-2
  37. Vuković M., Živković M., Milovanović V., Experimental verification and numerical crush analysis of thin-walled car body girder, Fourteenth conferency YUINFO 2008, Kopaonik, 2008, 09th - 12th March, ISBN 978-86-85525-04-9
  38. Adamović D., Stefanović M., Živković M., Rakić S., Uticaj brzine dubokog izvlačenja sa stanjenjem debljine zida na promenu koeficijenata trenja, 11th International Conference on Tribology – Serbiatrib ’09, Beograd, 2009, 13-15. maj, pp. 338-342, ISBN 978-89-7083-659-4
  39. Adamović, D., Stefanović, M., Živković, M., Devedžić, G, Uticaj parametara dubokog izvlačenja sa stanjenjem debljine na napon zatezanja zida izvlačenog čeličnog dela, XXXIII Savetovanje proizvodnog mašinstva Srbije 2009 sa međunarodnim učešćem, Beograd, 2009, 16-17.06.2009, pp. 109-112, ISBN 978-86-7083-662-4
  40. Busarac N., Dunic V., Zivkovic M., Slavkovic R., Zivkovic P., Potreba za paralelizovanjem FEM softvera, 15. Konferencija YUINFO 2009, Kopaonik, Serbia, 2009, 08th -11th March
  41. Cukanovic D., Zivkovic M., Procena trajne dinamicke cvrstoce nosaca motora u propisanim uslovima eksploatacije, 15. Konferencija YUINFO 2009, Kopaonik, Serbia, 2009, 08th -11th March
  42. Dunic V., Slavkovic R., Busarac N., Zivkovic M., Primena eksternih biblioteka u razvoju MKE softvera, 15. Konferencija YUINFO 2009, Kopaonik, Serbia, 2009, 08th -11th March
  43. Vukovic M., Zivkovic M., Lazic V., Eksperimentalno-numerički metod određivanja najpovoljnije tehnologije tačkastog zavarivanja, 15th conferency YUINFO 2009 Kopaonik, Kopaonik, Serbia, 2009, 08th -11th March
  44. Blagojević M., Rakić D., Živković M., Bogdanović Z., Kontrola dimenzione stabilnosti optičkim mernim sistemima, , Dvadeset sesto savetovanje sa medunarodnim ucescem "IBR 2010", Tara, 2010, 2 -4. jun
  45. Blagojević M., Rakić D., Živković M., Bogdanović Z., Optička koordinatna merenja delova i sklopova u automobilskoj industriji, 16th conferency YUINFO 2010, Kopaonik, 2010, 03 - 06 March, ISBN 978-86-85525-05
  46. Čukanović D., Radaković A., Živković M., Ispitivanje delaminacije laminatnih kompozitnih materijala primenom numeričkih metoda, 16th conferency YUINFO 2010, Kopaonik, 2010, 03 - 06 March, ISBN 978-86-85525-05-6
  47. Rakić D., Živković M., Vulović S., Divac M., Integracija napona Drucker-Prager materijalnog modela primenom teorije inkrementalne plastičnosti, 16th conferency YUINFO 2010, Kopaonik, 2010, 03 - 06 March, ISBN 978-86-85525-05-6
  48. Živković M., Milovanović M.., Rakić D., Vulović S., Numerička analiza zavarenih spojeva vagonskih konstrukcija, Dvadeset sesto savetovanje sa medunarodnim ucescem "ZAVARIVANJE 2010", Tara, 2010, 2 -4. jun
  49. Živković M., Milovanović V., Ćirović V., Rakić D., Primena metode centralnih razlika u numeričkoj analizi udara vagona tipa schimms u barijeru, 16th conferency YUINFO 2010, Kopaonik, 2010, 03 - 06 March, ISBN 978-86-85525-05
  50. Živković M., Vulović S., Vujanac R., Milanović B., Analiza čvrstoće multimedijalnog filtera, Dvadeset treci medjunarodni kongres o procesnoj industriji "PROCESSING 2010", Tara, 2010, 2 -4. jun
  51. Busarac N., Dunić V., Živković M., Slavković R., Basic use of CTL middleware in PAK software, 17th Conference and exibition YUINFO 2011, Kopaonik, Serbia, 2011, 6-9 March, pp. 71, ISBN 987-86-85525-08-7
  52. Busarac N., Dunić V., Živković M., Slavković R., Milovanović V., Analysis of MUMPS and PETSc solvers integrated in PAK software, 17th Conference and exibition YUINFO 2011, Kopaonik, Serbia, 2011, 6-9 March, pp. 79, ISBN 987-86-85525-08-7
  53. Busarac N., Živković M., Milovanović V., Slavković R., Dunić V., Analysis of MUMPS and PETSc solvers integrated in PAK software, YUINFO 2011, Kopaonik, 2011, 06.03-09.03, pp. 136, ISBN 978-86-85525-08-7
  54. 135.pdf
  55. Busarac N., Živković M., Slavković R., Dunić V., Basic use of CTL middleware in PAK software, YUINFO 2011, Kopaonik, 2011, 06.03-09.03, pp. 140, ISBN 978-86-85525-08-7
  56. 134.pdf
  57. Milovanović V., Vujanac R., Živković M., Busarac N., Rakić D., HYPERELASTIC MATERIAL MODEL DEVELOPMENT USING SIMBOLIC PROGRAMMING, YUINFO 2011, Kopaonik, 2011, 06.03-09.03, pp. 143, ISBN 978-86-85525-08-7
  58. 159.pdf
  59. Milovanović V., Živković M., Rakić D., Busarac N., Vujanac R., Hyperelastic material model development using simbolic programming, 17th Conference and exibition YUINFO 2011, Kopaonik, Serbia, 2011, 6-9 March, pp. 88, ISBN 987-86-85525-08-7
  60. Blagojević M., Nikolić A., Živković M., Prikaz polja strujanja izračunatog MKE programom PAK-F u programu za postprocesiranje ParaView, XVIII konferencija YU INFO 2012, Kopaonik, Srbija, 2012, 29. Februar - 03. Mart, pp. 327-330, ISBN 978-86-85525-09-4
  61. Blagojević M., Živković M., Merenje deformacija optičkim mernim metodama, Savetovanje sa međunarodnim učećem - IBR2012, Divčibare, Srbija, 2012, 09-12. Oktobar, ISBN 978-86-82585-10-7
  62. Dunić V., Busarac N., Slavković V., Slavković R., Živković M., Performance analysis of FEM software on different computer architectures, XVIII konferencija YU INFO 2012, Kopaonik, Srbija, 2012, 29. Februar - 03. Mart, pp. 179-182, ISBN 978-86-85525-09-4
  63. Topalović M., Blagojević M., Živković M., Povezivanje programa za SPH proračune sa programom za postprocesiranje ParaView, XVIII konferencija YU INFO 2012, Kopaonik, Srbija, 2012, 29. Februar - 03. Mart, pp. 260-263, ISBN 978-86-85525-09-4
  64. Vujanac R., Vulović S., Slavković R., Živković M., Marjanović N., Razvoj metodologije za automatsko generisanje 3d modela pri projektovanju skladišnih sistema, XVIII konferencija YU INFO 2012, Kopaonik, Srbija, 2012, 29. Februar - 03. Mart, pp. 297-300, ISBN 978-86-85525-09-4

 

Саопштење са скупа националног значаја штампано у изводу

 

  1. Petrović R., Živković M., Novaković M., Proračun čvrstoće i stabilnosti zidova rezervoara za skladištenje tečnog naftnog gasa, Naučno-stručni skup o gasu i gasnoj tehnici, Kladovo, Srbija, 2012, 22-25. Maj, ISBN 0354-8589

 

Ново лабораторијско постројење, ново експериментално постројење, нови технолошки поступак (уз доказ)

 

  1. M. Živković, A. Dišić, R. Slavković, M. Ravlić, R. Vujanac, M. Blagojević, D. Rakić, V. Milovanović, Uređaj za ispitivanje materijala pri velikim brzinama deformacije - Zatezni Hopkinsonov štap, TR-70/2012, Kragujevac, 2012

 

Прототип, нова метода, софтвер, стандардизован или атестиран инструмент, нова генска проба, микроорганизми (уз доказ)

 

  1. Милош Којић, Ненад Филиповић, Мирослав Живковић, Радован Славковић, Ненад Грујовић, „Софтвер за ламинарно струјање флуида и прeнос топлоте“, tr43, Институт за водопривреду „Јарослав Черни“, Клинички центар Крагујевац, Kragujevac, 2007
  2. tr43_2.pdf
  3. Мирослав Живковић, Гордана Јовичић , Милош Којић, Радован Славковић, Ненад Грујовић, Снежана Вуловић, „Софтвер за рачунску механику лома“ – ПАК–ФМ, tr22, ЈП Електропривреда Србије, Kragujevac, 2007
  4. tr22.pdf
  5. Мирослав Живковић, Снежана Вуловић, Гордана Јовичић, Никола Миливојевић, Бобан Стојановић, „Софтвер за замор“ – ПАК–ФАТ, tr21, ЈП Електропривреда Србије, Kragujevac, 2007
  6. tr21.pdf
  7. Родољуб Вујанац, Радован Славковић, Мирослав Живковић, Ненад Марјановић, Снежана Вуловић, Владимир Миловановић, „Нова метода за пројектовање и прорачун складишних система“, tr53, Министарство за науку Републике Србије, Приватно предузеће „ИЦ“ Инжењеринг д.о.о., Приватно предузеће „Милановић Инжењеринг “ д.о.о., ДП Застава Машине, Kragujevac, 2007
  8. tr53_2.pdf
  9. R. Vujanac, R. Slavković, M. Živković, N. Marjanović, S. Vulović, V. Milovanović, Nova metoda za projektovanje i proračun skladišnih sistema, TR-53/2010, Privatno preduzeće „IC“ Inženjering d.o.o., Privatno preduzeće „Milanović Inženjering “ d.o.o., DP Zastava Mašine, Kragujevac, 2010
  10. Милош Којић, Радован Славковић, Мирослав Живковић, Ненад Марјановић, Драган Ракић, „Софтвер за геомеханику“ – ПАК-ГЕО, tr58, Институт „Јарослав Черни“ а.д., Kragujevac, 2010
  11. M. Živković, M. Blagojević, A. Dišić, R. Slavković, Softver za određivanje deformacija na osnovu fotogrametrijskih merenja - CMM2Deformation, TR-72/2012, IC inženjering, Kragujevac, Milanović Inženjering, Kragujevac, PPT cilindri, Trstenik, Kragujevac, 2012
  12. M. Živković, M. Blagojević, G. Stanković, A. Nikolić, M. Živković, Softver za brzo generisanje modela konačnih elemenata krvnih sudova - STL2FEM, TR-71/2012, Klinički centar Srbije, Beograd, Kragujevac, 2012
  13. M. Živković, R. Slavković, M. Blagojević, M. Topalović, N. Busarac, J. Borota, Softver za numeričko rešavanje elektrostatičkih problema - PAK-E, TR-69/2012, Univerzitet u Kragujevcu, Fakultet inženjerskih nauka, Kragujevac, 2012
  14. M. Živković, R. Slavković, M. Kojić, N. Grujović, S. Vulović, N. Busarac, M. Topalović, Softver za proračun temperaturnog polja konstrukcija- PAK-T, TR-68/2012, Milanović inženjering, Kragujevac, Kragujevac, 2012

Пројекти:

УЧЕШЋЕ НА МЕЂУНАРОДНИМ ПРОЈЕКТИМА

  1. Centers of Excellence Projects, Development of the Engineering Software and Improvement of Teaching Process on the Regular and Postgraduate Studies at the Faculty of Mechanical Engineering, WUS Austria, 2003.
  2. Course Development Program +, Nonlinear Structural Analysis, WUS Austria, 2004.
  3. TEMPUS Curricula Development Project JEP-CD-16156-2001, Computer Science Curricula Founding and Upgrading, 09.2001–09.2004.
  4. eLearning Programme for Serbia and Montenegro, Transformation of traditional “Linear Structural Analysis” course into an e-Learning course, WUS Austria, 2005.
  5. TEMPUS University Management Project JEP-UM-17119-2002, Education Network Based on Information Technology- 09.2002-09.2005.
  6. TEMPUS Curricula Development Project JEP-CD-18114-2003, Restructuring of Mechanical Engineering Studies, 09.2003 – 09.2006.
  7. TEMPUS Curricula Development Project JEP-CD-40104-2005, Engineering Busines Management and Services Master Module, 09.2006 – 09.2009.
  8. RRSCD INNCODE 043820, Reinforcement of Research Capacity in Software Development and Innovative Collaborative Design and Engineering in Serbia and Montenegro, 09.2006 –09.2008.
  9. Enterprise Development and Innovation Fund (EDIF), Virtual Manufacturing Support for Enterprises in Serbia, EAR, 04-SER01/10/016, 2006.
  10. TEMPUS Curricula Development Project JEP-CD-41101_2006, ECDL for Serbian Administration, 09.2007-11.2009
  11. IPA ADRIA HUB - Bridge technical differences and social suspicions contributing to transform the Adriatic area in a stable hub for a sustainable technological development, 2013-2015

 

 

УЧЕШЋЕ НА ПРОЈЕКТИМА РЕСОРНОГ МИНИСТАРСТВА

  1. Којић М. и др., (1996-2000), Развој нових инжењерских метода у машинству и бродоградњи, Министарство за науку, технологије и развој Републике Србије, 11М06.
  2. Технолошки пројекат Министарства за науку, технологије и развој Републике Србије: Развој метода и софтвера за анализу, симулацију и оптимизацију процеса великих деформација у машинској индустрији, ТР258, 2002-2004.
  3. Технолошки пројекат Министарства за науку и заштиту животне средине Републике Србије: Развој софтвера за анализу чврстоће и процену радног века конструкција, ТР6204, 2005-2007.
  4. Пројекат Министарства за науку и заштиту животне средине Републике Србије по задатој теми, Ревитализација критичних компонената термоелектране на основу њиховог интегритета, ТД 7066, 2005-2007.
  5. Технолошки пројекат Министарства за науку и технолошки развој Републике Србије: Развој софтвера за експлицитну нелинеарну динамичку анализу, ТР12005, 2008-2010.
  6. Технолошки пројекат Министарства просвете, науке и технолошког развоја Републике Србије: Развој софтвера за решавање спрегнутих мултифизичких проблема, ТР32036, 2011-2015.

 

Датум измјене: 07.04.2015.

Радови на систему eKonferencije.com

https://www.high-endrolex.com/10